Bilt Hamber Dynax S50 | 750ml Aerosol Anti Corrosion Wax
Sale price
Price
$32.95
Regular price
Unit price
per
Bilt Hamber Dynax S50 | 750ml Aerosol Anti Corrosion Wax
Extreme duty anti-corrosion wax for cavities, voids and long term protection.
Supplied with a 600mm application lance.
When purchaced in multiples, you will receive 1x lance total
- Class-leading long-term protection for cavities, voids, chassis, doors, mud traps machinery, boats etc etc
- Resistant to changing conditions found in cavities, others are not
- Self-healing, protects even if film is cut
- Clings to vertical surfaces
- Displaces moisture
- Kills existing corrosion
- Deeply penetrates flanges and folded seams
- Easy to use - atomises superbly
- Low odour
- See-through coating with brown tint
- Provides Lubrication
- Available in ready to use modular injection system
How To Use
Use a brush, roller or spray to apply dynax S-50. Atomisation into enclosed cavities and voids is recommended to ensure thorough coverage of all surfaces. dynax S-50 contains highly polar corrosion inhibitors that are able to displace surface moisture; very wet surfaces should be pre-treated using Bilt-Hamber ferrosol.
dynax S-50 injection system requires no compressor or additional equipment
dynax S-50 is available in 5 litre tubs to 200 litre drums and upwards for spray application, for those without access to professional wax injection equipment Bilt-Hamber Laboratories have developed a superb system enabling dynax S-50 to be applied at high pressure simply, quickly and without mess. The pressurised giant-sized dynax S-50 aerosol dispenser accepts interchangeable heads: The 60cm cavity injection lance has a, precision fluid-tip to deliver at high-pressure, a dense, finely atomised circular mist of dynax S-50 ensuring 360 degree coverage of box sections and cavities. For accessible areas the extension tube is removed and a solid-cone spray pattern actuator simply clipped in its place. The pressurised aerosol dispensers contain a useful 750 ml (3/4 of a litre) of material.
dynax S-50 Pack with 60cm cavity injection lance
dynax S-50 is tolerant of a broad range of application pressures and will form a coherent film upon application. dynax S-50 will increase in viscosity at low storage temperatures.
It's recommended to place container in a room at around 15 degrees C for 24 hours prior to use particularly when using low pressure equipment for spray application.
For non-aerosol dispensed dynax S-50 warming the container (loosen cap first) by standing in a hot water bath will further reduce viscosity and is beneficial where deep crevice protection is required. Never heat aerosol dispensed product. Ensure that cavities are left unclosed for a period of 48 hours to allow the escape of carrier materials before bunging or stopping.
dynax S-50 will provide excellent protection at a wide-range of film thickness - aim to achieve a uniform dry-film thickness of around 50 microns. The tolerance of the material to maintain protection at very low film thickness makes dynax S-50 the ideal choice where surface inspection is not easy or where uniform coatings are simply not possible.
dynax S-50's all-round spray pattern can be seen easily here.
